Maintenence Re-Coat How to Re-coat your roof or deck after the ten year recommended warranty period. After ten years has elapsed, the warranty may be renewed for for another ten years by completing the Metacrylics Warranty Renewal Specification procedures below. CALCULATING HOW MUCH MATERIALS TO BUY ENTER Square Feet Press TAB DIVIDED BY 100 = Roofing SQs Acrylic PRIMER 0.3 Gallon MULTIPLIED BY SQs = Gallons Acyrlic BASE 2 Gallons MULTIPLIED BY SQs = Gallons Acrylic WHITE 2 Gallons MULTIPLIED BY SQs = Gallons 3-COURSE MATERIALS * ENTER Lineal Feet Press TAB Acrylic GEL (with 4" Fabric) Lineal Feet DIVIDED BY 33 = Gallons Acrylic GEL (with 6" Fabric) Lineal Feet DIVIDED BY 22 = Gallons FABRIC Lineal Feet DIVIDED BY 160 = Rolls *NOTE: 3 course materials are not required for re-coat unless you are repairing cracks, blisters or other damage to the roof surface.
	Tools Required for Application: Work clothes; Rubber gloves; Sharp scissors 9" Heavy-duty Paint roller frame 9" Roller covers for semi-rough surfaces Spray water bottle; water for tool clean-up
	STEP 1: Preparation of Roof Power wash the entire roof surface.
	STEP 2: Application of Acrylic Primer Apply Metacrylics Clear Acrylic Primer @ 1/2 gallons/100 sq. ft. Allow 4 hours cure time.
	STEP 3: Two Applications of Acrylic Base If roller application. Apply 2 applications of Acrylic Base @ 1 gallon/100 sq. ft. each application. Allow 24 hours cure time between coats. If SPRAY APPLICATION Apply 1 application of Acrylic Base @ 2 gallon/100 sq. ft. each application. Allow 24 hours cure time between coats. Be sure to select the appropriate color base for your recoat. STEP 4: Two Applications of Acrylic White (or Color) Apply two applications of Acrylic White (or color) @ 1 gallon/100 sq. ft. each application. Allow 24 hours drying time between each application or dry enough to walk on. If SPRAY APPLICATION Apply 1 application of Acrylic (or color) @ 2 gallon/100 sq. ft. each application. Allow 24 hours cure time between coats.   * To reinstate the full warranty you must pay the $100 inpection and approval fee.( order online<--click here)
	Important Application Information: * DO NOT APPLY products if rain is imminent within 24 hours, or during fog or drizzle. Metacrylics products are water-based and could wash off if not fully cured. * DO NOT APPLY when temperatures are below 40° F. PROTECT materials from freezing and extreme heat. * The Acrylic White dries slowly when temperatures are below 55° F. Dark colors dry much faster. Areas shaded from sunlight dry very slowly. 72 hours or more may be required for proper curing. * DO NOT THIN or add solvents. * KEEP AWAY from children. * CAUTION! Wet acrylic is extremely slippery when stepped on. Use a safety rope around you on sloped surfaces. * ALWAYS STIRE the Metacrylics Primer before any application. Do not stir the Gel. Usually, the Base and Acrylic Colors do not need to be stirred. * Wash up completely with water, abrasive hand cleaner, or cold cream and a fibered wash cloth. Remove dried materials from hands and clothing as soon as possible.